Sbc Chevy Turn Key Engine Dress Up Kit, Front Acc. Inc. Wp, Alt, Pulleys, Etc

SBC CHEVY FRONT ACCESSORIES MASTER KIT. INCLUDES EVERYTHING NEEDED FOR THE FRONT OF THE ENGINE. In one of the pictures below it shows the front end dress up kit on one of our engines. The second belt is not installed to show the bracket behind the power steering pulley.

This accessory master kit is exactly what we use on our Turn-Key complete engines. The parts used are of exceptional quality, and fit. We have seen other configurations on the market that are nothing more than a mix-match of parts with no regard as to how they will go together. You will also receive the needed hardware for the pulleys and brackets. High quality V-belts are included and are the exact length needed.

This setup includes a high volume long style water pump. These water pumps have an aluminum impeller. They are very high quality pumps. Few sellers offer this type of pump.

If your vehicle originally had a short water pump on it, and you plan to use an electric fan, then changing over to the long water pump should not be a problem. Most all Chevy vehicles went to the long water pump setup around 1969. Should your vehicle be an earlier model than 1969, this setup should still work without a problem, but if you're running a mechanical fan, be sure you have enough space for your fan blade to clear your radiator fins. The long water pump protrudes forward approx. 3/4 of an inch longer than the short version.

GM did not change mounting points on their blocks from the 60's on up, as far as we know. As to how far back in model year that you can go with this setup, we're not sure, but we don't really see any problem using this on engines from the mid-60's on up to the last of the SBC V-8 305 and 350 engines that operated with a V-belt system. Even Gen 1 blocks from the serpentine era can be converted back to the conventional V-belt setup should you desire. Dart blocks are also not a problem for any of these accessories. It is also possible that some of the very early engines from the 50's that had generators on them may not have had the accessory hole for the alternator bracket.

This hole can usually be drilled and tapped in the existing head. All of the parts in this kit are offered individually in our ads, and many customers have had difficulty in choosing the correct parts when trying to put together a front accessory setup. Every pulley and bracket must correspond to the accessories used. We have listed all the parts that you will receive in this kit.

We will also list what is not included, since the picture we are using has other items on the engine that you will not receive. Please read this ad in its entirety. 120 amp chrome one or three wire alternator. High volume satin aluminum water pump. Chrome power steering pump, A-can style.

Laser cut chrome plated PS pump bracket. Aluminum pulleys for Crank, water pump, and PS pump. Premium Dayco Top Cog V-belts from Federated. All mounting hardware for the brackets and pulleys. 304 Stainless socket head water pump bolts.

The engine, heads, valve covers, intake manifold, starter, fuel pump or carburetor. Harmonic damper and damper bolt.

Water neck or water pipe on water pump. In the pictures below, you can see that this bracket is very well designed, and will secure the power steering pump securely. As you can see in the picture below, this bracket is very simple to install. Adjusting the belt is also a straightforward process. This is the bracket we now use on all of our front end dress up kits and turn key engines.

This bracket is made very well, and will secure the power steering pump properly. The photo below shows the bracket before pulley installation. This satin aluminum water pump is our high performance series with a cnc'd aluminum impeller. Stainless socket head water pump bolt set with stainless washers. 120 AMP ONE WIRE CHROME ALTERNATOR AND POLISHED ALUMINUM BRACKET KIT.

Many have asked why were able to sell our products for such a great price. Its because were also a major distribution center for all of the parts used in this kit. Few retailers ever get to master-wd pricing. We also believe in keeping our profit levels low enough to allow the working man a chance to build his car the way it should be built. You may have noticed other sellers using a similar name offering similar products.

These other sellers have capitalized on our name as we see it, and many customers searching for us will inadvertently find them, thinking we are one in the same company. Our official company name is Skip White Performance. Our sales staff has limited technical knowledge on this product and are usually unable to answer many of the questions asked. See our other listings for variations of this product.

We are not responsible for collateral damage caused by the use of this product. The RGA number must be included on the return label. Even though you may have explained the problem to us, and been granted permission to return the product, we must have a written explanation and a contact number included with the product. It is also recommended that you include the name of the person from our company that you have been in contact with.

Following these guidelines will make the return process work as it should. If you are in a 3 day zone, and your package leaves on a Thursday, you should receive it on the following Tuesday. The item "SBC CHEVY TURN KEY ENGINE DRESS UP KIT, FRONT ACC. WP, ALT, PULLEYS, ETC" is in sale since Thursday, April 1, 2021.

This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Engines & Components\Other". The seller is "skipwhite" and is located in Kingsport, Tennessee.

This item can be shipped worldwide.

Modified Item: No
Custom Bundle: No
Interchange Part Number: CHROME ALTERNATOR POLISHED BRACKETS ETC.
Manufacturer Part Number: WATER PUMP POWER STEERING PUMP, BRACKETS, ETC
Other Part Number: BELTS, HARDWARE ETC.
Brand: TSP
Non-Domestic Product: No