Chrome Power Steering Pump Saginaw 5/8 Keyed Shaft Style for Chevy SBC BBC

  

The power steering pump is designed to converting power to the power steering fluid from the reservoir into the steering gear and keeps the wheels running in the right conditions. The power steering pump is made of high-quality material for superior performance and durability, with excellent power conversion capability. Easy to install, this power steering pump is an ideal replacement for your original faulty or leaking one. Desirable early style "Type 1" pump with threaded and keyed shaft for easy pulley installation.

Have a 0.3" hose barb for the return line, a female M161.5 inverted flare fitting and 3/8 " mounting holes. Begin by removing the power steering belt and disconnecting the pressure and return hoses from the pump. The fluid will drain out of the pump and lines, so have a waste oil container available. Emove all bolts that retain the pump and its mount brackets to the engine.

Remove the pump assembly from the vehicle. Using a power steering pump pulley remover, remove the pulley from the pump. Remove the mounting bracket from the pump. Install the pump mount bracket onto the new pump. Install the pump pulley onto the pump.

Attach the arm by removing the lower bolt and install the arm. Add washers as needed to keep the arms straight with the pump face. Tighten up all bolts and install the belt.

Check that all bolts are tight and the pump is properly aligned. Line from hose barb to low-pressure port, then line from SAE inverted flare to high pressure. Add fluid into the inlet port, then start the vehicle, test the steering power.

1 x Power Steering Pump. Please confirm your old part number matches up with one of the part numbers above. No Instruction Included, professional installation is highly recommended.

OTHER ITEMS YOU MIGHT ALSO LIKE.