For GM 1966-1974 Saginaw 5/8 SBC Power Steering Pump Kit CHROME 1200-1450 PSI

  

Fit most GM 66-74 Saginaw 5/8 Keyed Shaft Style. For 70-74 Chevrolet Monte Carlo V8 5.7L / 6.6L / 7.4L. For 74 Chevrolet Camaro V8 5.7L.

For 73 Chevrolet Camaro V8 5.0L / 5.7L. For 70-72 Chevrolet Camaro V8 5.0L / 5.7L / 6.6L.

For 70 Chevrolet El Camino V8 6.5L. For 70-73 Chevrolet El Camino V8 5.0L.

For 70-74 Chevrolet El Camino V8 5.7L / 6.6L / 7.4L. For 74 Chevrolet Malibu V8 5.0L. For 73-74 Chevrolet Malibu V8 5.7L / 6.6L / 7.4L. For 70 Chevrolet Chevelle V8 6.5L. For 70-73 Chevrolet Chevelle V8 5.0L / 5.7L / 6.6L / 7.4L. For 66-68, 70-72 Chevrolet Biscayne.

For 66-67 Chevrolet El Camino. Vehicle compatibility charts are for REFERENCE ONLY. Check your vehicle with OEM below to match your needs.

100% quality assurance tested, more responsive, less expensive, easier to install. Desirable early style "Type 1" pump with threaded and keyed shaft for easy pulley installation. Have a 0.3 hose barb for the return line, a female M161.5 inverted flare fitting and. Precise and smooth steering, get maximum out of your steering system. Material: made of Iron, Chrome plated.

(100% Brand New Never Used Or Installed). Begin by removing the power steering belt and disconnecting the pressure and return hoses from the pump.

The fluid will drain out of the pump and lines, so have a waste oil container available. Emove all bolts that retain the pump and its mount brackets to the engine. Remove the pump assembly from the vehicle. Using a power steering pump pulley remover, remove the pulley from the pump.

Remove the mounting bracket from the pump. Install the pump mount bracket onto the new pump. Install the pump pulley onto the pump.

Attach the arm by removing the lower bolt and install the arm. Add washers as needed to keep the arms straight with the pump face. Tighten up all bolts and install the belt. Check that all bolts are tight and the pump is properly aligned. Line from hose barb to low-pressure port, then line from SAE inverted flare to high pressure. Add fluid into the inlet port, then start the vehicle, test the steering power. No installation guides are included, we highly recommend to seek professional installation. Will come with everything you see in the picture. Please allow difference due to manual measurement. The color of the actual items may slightly different from the listing images due to different computer screen, thanks for your understanding. For any inquiries or special requests such as larger amount ordering please write to us. Thank you for your understanding. Above time are for reference ONLY.

Lowest price on brand new, in-the-box auto parts.