For 74 Chevrolet Camaro V8 5.7L. For 73 Chevrolet Camaro V8 5.0L / 5.7L.
For 70-72 Chevrolet Camaro V8 5.0L / 5.7L / 6.6L. For 70 Chevrolet El Camino V8 6.5L. For 70-73 Chevrolet El Camino V8 5.0L. For 70-74 Chevrolet El Camino V8 5.7L / 6.6L / 7.4L.
For 74 Chevrolet Malibu V8 5.0L. For 73-74 Chevrolet Malibu V8 5.7L / 6.6L / 7.4L. For 70 Chevrolet Chevelle V8 6.5L. For 70-73 Chevrolet Chevelle V8 5.0L / 5.7L / 6.6L / 7.4L. For 66-68, 70-72 Chevrolet Bel Air.For 66-68, 70-72 Chevrolet Biscayne. For 66-67 Chevrolet El Camino. Begin by removing the power steering belt and disconnecting the pressure and returning hoses from the pump. The fluid will drain out of the pump and lines, so have a waste oil container available.
Remove all bolts that retain the pump and its mount brackets to the engine. Remove the pump assembly from the vehicle. Using a power steering pump pulley remover, remove the pulley from the pump. Remove the mounting bracket from the pump.
Install the pump mount bracket onto the new pump. Install the pump pulley onto the pump. Attach the arm by removing the lower bolt and installing the arm. Add washers as needed to keep the arms straight with the pump face.
Tighten up all bolts and install the belt. Check that all bolts are tight and the pump is properly aligned.
Line from hose barb to low-pressure port, then line from SAE inverted flare to high pressure. Add fluid into the inlet port, then start the vehicle, and test the steering power. Please allow differences due to manual measurement. No installation guides are included, we highly recommend seeking professional installation.The color of the actual items may be slightly different from the listing images due to different computer screens. For any inquiries, please write to us.