- Sbc Chevy Chrome
- Brand
- Arp (54)
- Autonets (37)
- Bills Hot Rod Co (30)
- Cadillac (94)
- Chevrolet (112)
- Espeedpro21 (43)
- Ford (35)
- Gearhead (172)
- Gladiator (53)
- Maxpeedingrods (32)
- Motorchrome (35)
- Motornets (144)
- Mr Gasket (47)
- Pirate Mfg (73)
- Proform (350)
- Rodspeedracing (32)
- Rpc (38)
- Southwest Speed (30)
- Speedway Motors (82)
- Tsp (37)
- Other (1908)
- Fitment Type
- Material
- 6061 Billet Aluminum (3)
- 8740 Chrome Moly (10)
- Aluminum (138)
- Billet Aluminum (4)
- Cast Aluminum (8)
- Cast Iron (7)
- Chrome (52)
- Chrome Stamped Steel (2)
- Chrome Steel (34)
- Chrome-moly Steel (10)
- Die Cast Aluminum (4)
- Iron, Chrome Plated (8)
- Material (16)
- Metal (9)
- Mild Steel (29)
- Premium Chrome Moly (2)
- Stainless Steel (11)
- Stamped Steel (24)
- Steel (124)
- T304 Stainless Steel (10)
- Other (2933)
- Surface Finish
- Aluminum Chrome (4)
- Black (17)
- Chrome (444)
- Chrome / Aluminum (5)
- Chrome / Polished (5)
- Chrome Aluminum (14)
- Chrome Cast Aluminum (7)
- Chrome Chrome (10)
- Chrome Plasma (4)
- Chrome Plated (7)
- Chrome Plated Stems (3)
- Chrome Polished (10)
- Chrome Steel (36)
- Chromed Plastic (6)
- Natural / Chrome (5)
- New (13)
- Polished (3)
- Polished Chrome (11)
- Smooth (8)
- 7127 (16)
- Other (2810)
- Warranty
- Water Pump
Power Steering Pump for Chevy For BBC For SBC 350 454 Chrome Saginaw 5/8 Key
Begin by removing the power steering belt and disconnecting the pressure and return hoses from the pump. The fluid will drain out of the pump and lines, so have a waste oil container available.
Emove all bolts that retain the pump and its mount brackets to the engine. Remove the pump assembly from the vehicle.
Using a power steering pump pulley remover, remove the pulley from the pump. Remove the mounting bracket from the pump. Install the pump mount bracket onto the new pump. Install the pump pulley onto the pump.Attach the arm by removing the lower bolt and install the arm. Add washers as needed to keep the arms straight with the pump face. Tighten up all bolts and install the belt. Check that all bolts are tight and the pump is properly aligned.
Line from hose barb to low-pressure port, then line from SAE inverted flare to high pressure. Add fluid into the inlet port, then start the vehicle, test the steering power. The power steering pump is designed to converting power to the power steering fluid from the reservoir into the steering gear and keeps the wheels running in the right conditions.
The power steering pump is made of high-quality material for superior performance and durability, with excellent power conversion capability. Easy to install, this power steering pump is an ideal replacement for your original faulty or leaking one. Desirable early style "Type 1" pump with threaded and keyed shaft for easy pulley installation. Have a 0.3" hose barb for the return line, a female M161.5 inverted flare fitting and 3/8 " mounting holes. Flow Rate: 1.3-3.2 GPM.
Placement on Vehicle: Front, Left, Rear, Righ. 1 x Power Steering Pump.
For Chevrolet Camaro 1974 V8 5.7L. For Chevrolet Camaro 1973 V8 5.0L / 5.7L.
For Chevrolet El Camino 1970 V8 6.5L. For Chevrolet Malibu 1974 V8 5.0L. For Chevrolet Chevelle 1970 V8 6.5L.
Please confirm your old part number matches up with one of the part numbers. No Instruction Included, professional installation is highly recommended.